Mata Prasad Gupta

CURRICULUM VITAE


Name: Mata Prasad Gupta,

Position Applied for: “Senior Electrical Engineer”

Contact Number in India: +91-9452641404

E mail address: mp_gupta_2006@yahoo.co.in

Skype ID – mpgupta.com

Availability: Immediate

Present Location: India, U.P., Mirzapur

Expected Salary: As per company standard or less
______________________________________________________________________
PROFESSIONAL QUALIFICATION¬
B.TECH. in Electrical Engineering, H.B.T.I. KANPUR University, 1987, U.P. INDIA

CAREER SUMMARY
1) 25 years experience in detail design, supervision of erection activities, witteness and carryout testing & commissioning, carryout operation and maintenance of electrical equipment required for various industrial project like COMBINE CYCLE THERMAL POWER PLANT, GIS SUBSTATION PROJECT, COGENARATION PROJECT, DESALINATION PROJECT, PETROCHEMICAL PROJECT, OIL AND GAS PROJECT etc.
2) Attend meeting to solve the technical problem related to design issue, construction issue, testing and commissioning issues, QA/QC issues etc.
3) Attend Site Acceptance test (SAT), Factory Acceptance test (FAT) as required in various project.
4) Manage electrical engineer team working for the project.
_________________________________________________________
SKILLS_TECHNICAL KNOWLEDGE_ MY ABILITIES:

1) Prepare and review plan, schedule, single line diagram, equipment layout, technical drawing and document, vendor drawing and document, data sheet, BOQ, cable schedule, interconnection schedule and provide technical support to construction team to complete the project in time.

2) Design, erection, testing & commissioning, of so many prestigious project like GIS substation project, combine cycle thermal power project, cogeneration project, DESALINATION project, petrochemical project, oil and gas project execution of following electrical equipment:
A) G.I.S. Sub Station 400kV /220 KV / 132 KV/ 110kV
B) 33kV/ 6.9kV MV SWGR, LV SWGR, MCC,
C) Protection panel, excitation panel, AVR panel, control panel, synchronization panel, UPS panel etc in various projects.
D) Steam turbine generator 750MW, 510MW etc
E) 510 MVA, 400 kV / 24 kV Power transformers, MV/LV transformer,
F) 2MVA diesel generator sets,
G) MV motors, LV motors, DC motors etc

3) Design, erection and testing, commissioning of 400kV, 220kV, and 132kV GIS Substations and 33/11kV Substations.

4) Computer Proficiency: We familiar with ETAP, PMIS, MIS, MS Office, Auto CAD 2006, etc
_____________________________________________________________
EXECUTIVE SUMMARY OF MAJOR PROJECTS COMPLETED SUCCESSFULLY FROM BEGINEEING TO END:

1) SAUDI ELECTRICITY COMPANY: JEDDAH SOUTH THERMAL POWER PROJECT, 750MW X 4NOS, JEDDAH, SAUDI ARABIA.
2) EMAL: EXPANSION OF EMIRATES ALUMINUM SMELTER COMPLEX, TAWEELAH, ABU DHABI, PHASE 2 (EMAL), U.A.E.
3) ARAMCO: KHURSANIYA GAS PROJECT at KARAN SITE (ARAMCO), SAUDI ARABIA
4) ASHGHAL: PUMPING STATION PS-32, DOHA QATAR
5) SAUDI ELECTRICITY COMPANY: SHOAIBA THERMAL POWER PROJECT of Capacity (523MW X 6NOS), JEDDAH, SAUDI ARABIA,
6) SAUDI ELECTRICITY COMPANY: PP-9 POWER PROJECT, EXTENSION “E” for GAS TURBINE (100MW-4nos) in RIYADH
7) ADWEA, Abu Dhabi: UMM AL NAR DESALINATION Project and 220kV GIS substation Project
8) FUJJARAH: Combined cycle Thermal Power Project and DESALINATION Project
9) ABNZAHR PP project expansion and PETROCHEMIA project expansions in Saudi Arabia
10) FLEX CHEMICALS LTD Project in India, Gwalior, MADYA PRADESH, INDIA
_____________________________________________________________
PROFESSIONAL EXPERIENCE
_______________________________________________________________________

“SENIOR ELECTRICAL ENGINEER”
FICHTNER /AL-JAZIRAH ENGINEERS & CONSULTANTS, JEDDAH, SAUDI ARABIA
DURATION : 11/01/2014 –to- 31/08/2016 (2 YEAR / 8 MONTH)

PROJECT: JEDDAH SOUTH THERMAL POWER PLANT,

(Steam turbine power plant of capacity 3,000MW (750MW x 4no) with complete system like boiler, DESALINATION plant, pump house, WATER treatment plant, chlorination, BOP etc. Project cost is 3.46 billion USD)

CLIENT: SAUDI ELECTRICITY COMPANY
CONSULTANT: FICHTNER / AJEC
MAIN CONTRACTOR: HHI, SOUTH KOREA

COMPANY SCOPE OF WORK:
This is a reputed consultant company, responsible for FEED, design, erection, testing, commissioning of following equipment require for this project:

A) 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV/6.9kV Substations
B) Steam Turbine 750MW – 4 units
C) Super critical Steam boiler - 4 units and utilities
D) 2MW – 5units emergency diesel generator and accessories for black start and safe shut down of turbine
E) 500MVA HV transformer/ MV transformer/ LV transformer etc
F) Sea WATER Intec, chlorination plant, DESALINATION plant, WATER treatment plant, REMIN plant, pumping station, MV SWGR, MV motors etc

KEY ROLE & RESPONSIBILITIES:
I was working client side responsible for verification (as per contract document) contractor detail designs, procurement, delivery of electrical equipment, verify site construction, witness of testing and commissioning, of electrical equipment to complete the project in time. My job descriptions in detail are as below:

1) Manage field electrical engineers.
2) Prepare and review Single line diagrams, Relaying and metering one line diagram, Phase diagram, equipment layout etc.
3) Prepare and review technical documents like protection setting, Load Analysis, electrical sizing calculations, Control Schematics, power equipment EARTHING, lighting and lightning layouts, Cable schedule, interconnection schedule, bill of materials etc
4) Prepare and review pre-commissioning documents like ITP, Interlocks, interface list Pre-Commissioning procedures and schedules, vendor schedule, system & sub systems, Schematic.
5) Prepare and review design, Installation and commissioning of 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations
6) Attend testing, commissioning and take action to complete the project in time.
7) Attend Site Technical Coordination Meetings to discuss Contractor(s) submissions, Shop Drawings and construction related matters.
8) Attend Progress Meeting with the Client, Contractor(s), Project Manager to monitor the progress of work against the approved drawing, document, material etc.
9) Attend Factory Acceptance Test (FAT’s) and Site Acceptance Test (SAT’s) for electrical equipment on assigned project
10) Resolves technical problem related to design, site work, and material specification

“SENIOR ELECTRICAL ENGINEER”
SPIE OIL AND GAS SERVICES, ABU-DHABI, U.A.E,
DURATION : 10/2/2013 –To- 31/08/2013 (7 MONTHS)

PROJECT: EXPANSION OF EMIRATES ALUMINUM SMELTER COMPLEX, TAWEELAH, ABU DHABI, PHASE 2 (EMAL)
CLIENT: EMIRATE ALUMINIUM (EMAL)
MAIN CONTRACTOR: SNC- LAVALIN

COMPANY SCOPE OF WORK:
This is a reputed, very big aluminum manufacturing company. I was involved in phase 2 project expansion for erection, testing, commissioning of following electrical equipment:
A) 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations
B) Rectifier transformers erection and testing, commissioning
C) HV cable laying and testing
D) GT erection and testing, commissioning
E) HV Power transformer, installation and testing, commissioning

KEY ROLE & RESPONSIBILITIES:
I was working on client side in project department as a “SENIOR ELECTRICAL ENGINEER” responsible for witness of testing & commissioning of electrical equipment to complete the project in time. Attend witness and carryout testing, pre commissioning as per approved procedure of following electrical system equipment:

A) 220 kV G.I.S. S.W.G.R, 33 kV. S.W.G.R, 6.6 kV S.W.G.R
B) Auto changeover of MV/LV SWGR with and without DCS
C) MV SWGR, LV SWGR, etc
D) Protection testing by secondary injection kit and protection setting
E) Stability of protection system
F) Matrix trip test verification
G) Dynamic testing of generator Excitation testing of generator
H) Synchronization of generator with grid
I) Generator capability curve verification
J) Rectifier transformers and rectifier panel etc.

“SENIOR DESIGN ELECTRICAL ENGINEER”
PETROFAC INTERNATIONAL LTD / ARAMCO, JUBAIL, SAUDI ARABIA
DURATION : 11/2010 – 3/10/2012 (1YEAR /10 MONTHS)

PROJECT: KHURSANIYA GAS PROJECT at KARAN SITE (ARAMCO), SAUDI ARABIA
CLIENT: ARAMCO
MAIN CONTRACTOR: PETROFAC INTERNATIONAL LTD

COMPANY SCOPE OF WORK:
This is an EPC company, responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning, operation and maintenance of following equipment to complete the project:

1) 150MW gas turbine and accessories
2) 115kV GIS substation/ 33kV substation/ MV and LV substation/ MCC room etc.
3) 5MW emergency diesel generator and accessories
4) Auxiliary boiler, HRSG and utilities
5) 50MVA HV transformer/ MV transformer/ LV transformer etc

KEY ROLE & RESPONSIBILITIES:
I was working in project/ engineering department as a “SENIOR DESIGN ELECTRICAL ENGINEER” to develop detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Equipment Lay-outs, Cable Routing and Lay-out Drawings, Cable Trench and Tray Lay-out Drawings, cable size calculation, Cable Schedules, Cable Drum Schedules, Schematic Diagrams, Logic Diagrams, Interconnection Schedules, Hazardous Area Classification, Lighting System Lay-out and Details, grounding / Lighting System Lay-out and Details, Heat Tracing Lay-out and Details, Installation Standard Drawings, Relay Coordination, relay setting and other required documents.

1) Prepare and review design, specification, technical data sheet for electrical systems and equipment including:-HV and LV switchgear, PCC, MCC, control panel, VFD panel, Transformers, Power Generators and Motors, Variable Speed Drives - AC & DC UPS, Design of electrical power systems, Emergency Diesel generators, Electrical Control & Monitoring system, Electrical Interface with Control System, CATHODIC Protection and Heat Tracing systems
2) Prepare material specifications, data sheets, method statement, drawing as per site requirement
3) Prepare and issue purchase requests for shortage of material at site and consumables items.
4) Prepare specifications, purchase orders, subcontracts, inspection reports, delivery schedules, instruction manuals and technical data
5) Prepare detailed engineering of electrical design, switchgear, electrical systems, packages, electrical specifications etc
6) Prepare reply to all technical queries to clarify technical problem to construction team
7) Check and ensures that vendors bids for material and equipment are in conformance to specifications.
8) Monitoring equipment installation and planning for delivery of construction materials and equipments

“SENIOR ELECTRICAL ENGINEER”
PARSONS INTERNATIONAL LTD – DOHA, QATAR
DURATION : 03/2008 To 11/2010 (2 YEARS / 8 MONTHS)

PROJECT: PUMPING STATION PS-32
CLIENT: ASHGHAL
CONSULTANT: PARSON INTERNATIONAL LTD. (An American reputed consultant organization)
MAIN CONTRACTOR: BURHAN INTERNATIONAL CONSTRUCTION COMPANT

COMPANY SCOPE OF WORK:
Review and prepare drawing and document, approve submittal, verify contractor work as per client contract document, verify testing and commissioning of following electrical equipment required for this project:
A) 33kV substation / 11kv substation, MV and LV substation/ MCC room/ control room etc.
B) Wet well/dry well MV motors along with pumps
C) HV transformer/ MV transformer/ LV transformer etc
D) Lighting, grounding, cable tray installation, CATHODIC protection etc
E) HV/MV/LV cable laying and termination etc
F) 1MW emergency diesel generator and accessories

KEY ROLE & RESPONSIBILITIES:
I was working on client side in project department, responsible for verification (as per contract document) detail design, procurement, and delivery of electrical equipment in time, verify construction, testing and commissioning of electrical equipment to complete the project. My job descriptions in detail are as below:
1) Prepare Drafts of any necessary correspondence required for proper administration of the contract as directed by the Resident Engineer
2) Review of single line diagram, Specification and data sheet of electrical equipment,
3) Check the calculations for cable sizing, voltage drop, relay co-ordination, grounding etc.
4) Prepare information for submittals, RFIs, O&M manuals and other technical
Documentation
5) Review design of HV and LV electrical distribution networks up to 22kV, treatment plant and pump station electrical services including motor starters, variable frequency drives and power factor correction, grounding and lightning protection systems, safety and fire alarm systems, internal and external lighting systems.
6) Review preparation of construction drawings and schedules,
7) Monitoring equipment installation and planning for delivery of construction materials and equipments
8) Reviews specifications, purchase orders, subcontracts, inspection reports, delivery schedules, instruction manuals and technical data
9) Ensures that vendors bids for material and equipment are in conformance to specifications

“SENIOR FIELD ELECTRICAL ENGINEER”
A.M. Al-ISSA / KULJIAN CONSULTING ENGINEERS – SAUDI ARABIA
DURATION : 02/2005 To 03/2008 (3 YEARS / 1 MONTH)

PROJECT: SHOAIBA POWER PLANT, JEDDAH, SAUDI ARABIA,
(Steam turbine power plant of capacity 2,115MW (523MW x 4no) with complete system like boiler DESALINATION plant, pump house, WATER treatment plant, chlorination etc. (A largest steam power plant in Meddle East. Project cost is 1.86 billion USD)

CLIENT: Saudi Electricity Company, western region, SHOAIBA, Jeddah,
CONSULTANT: A.M. Al-ISSA / KULJIAN Consulting Engineers
(A reputed organization famous for power plant consultancy)
MAIN CONTRACTOR: ALSTOM, France

COMPANY SCOPE OF WORK:
Review all drawing and document require for the project, verify installation work as per client contract document and attend testing, commissioning and take action to complete the project in time for following electrical equipment:
A) Steam Turbine 525MW – 6 units
B) Steam boiler - 6 units and utilities
C) 5MW emergency diesel generator and accessories for black start and safe shut down of turbine
D) 50MVA HV transformer/ MV transformer/ LV transformer etc
E) Sea WATER Intec, chlorination plant, DESALINATION plant, WATER treatment plant, REMIN plant, pumping station, MV SWGR, MV motors etc
F) 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations

KEY ROLE & RESPONSIBILITIES:
I was working on client side in project department as a “SENIOR FIELD ELECTRICAL ENGINEER” responsible for verification (as per contract document) detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning of following equipment:
1) Prepare and review plan, schedule, technical specifications, contract documents, etc.
2) Conduct meeting and coordinate with contractor to carryout projects.
3) Review and approve contractor’s design, supervise erection, testing and commissioning of substations.
4) Resolves technical problem related to design, site work, and material specification
5) Design, Installation and commissioning of 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations
6) Review all shop/ composite drawings, materials, samples submitted by the contractors to ensure compliance with technical specifications requirements
7) Check the installations of electrical systems on a daily/regular basis to ensure quality control and compliance with contract documents and approved material and shop drawings
8) Reviews specifications, purchase orders, subcontracts, inspection reports, delivery schedules, instruction manuals and technical data
9) Attend Factory Acceptance Test (FAT’s) and Site Acceptance Test (SAT’s) for electrical equipment on assigned project

SENIOR FIELD ELECTRICAL ENGINEER
MIDDLE EAST TECHNICAL SERVICES – RIYADH, SAUDI ARABIA
DURATION : 05/2004 To 11/2004

PROJECT: PP-9 Power Plant, Extension “E” for gas turbine 100MW-4nos and 58MW-4nos, Riyadh
CLIENT: SAUDI ELECTRICITY COMPANY
MAIN CONTRACTOR: BINLADIN Electromechanical Company (BEMCO)
SUB CONTRACTOR: Middle East Technical Services (A sister concern of LG high voltage cable and accessories, South Korea)

COMPANY SCOPE OF WORK:
Supply cable and accessories and carryout laying, testing and commissioning of:
A) 380kV cable and cable accessories- 2 circuit
B) 132kV cable and cable accessories – 2 circuit

KEY ROLE & RESPONSIBILITIES:
Working in project department as a “SENIOR FIELD ELECTRICAL ENGINEER” responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning, operation and maintenance of electrical equipment to complete the project in time:
1) Look after site coordination work for 380kV, 132kV cable laying and cable termination at GIS end, and transformer end,
2) Interface Co-ordination with all related disciplines to attend Factory Acceptance Tests, Site Acceptance Tests & commissioning
3) Preparation of all required reports, follow up documentation and correspondence of the project
4) Carryout high voltage testing of 380kV, 132kV cable and cable accessories etc

SENIOR ELECTRICAL ENGINEER
M/S DOOSAN, KOREA HEAVY INDUSTRIES AND CONSTRUCTION COMPANY LTD, ABU DHABI, U.A.E,
DURATION : 07/2002 To 07/2003 (1YEAR)

PROJECT: FUJJARAH COMBINED CYCLE POWER PLANT AND DESALINATION PROJECT
CONSULTANT: FICHTNER CONSULTANT
MAIN CONTRACTOR: DOOSAN, KOREA HEAVY INDUSTRIES AND CONSTRUCTION COMPANY LTD
KEY ROLE & RESPONSIBILITIES:
Working in main contractor as a “SENIOR TESTING AND COMMISSIONING ELECTRICAL ENGINEER “ responsible for testing, commissioning, operation and maintenance of following electrical equipment:
1) Steam turbine 250MW- 2 no, Gas turbine 110MW – 5no, HRSG – 5no, RO plant – 1no, DESALINATION plant – 5 no, Chlorination plant, DEMIN plant etc.
2) 132kV gas insulated switch gear (GIS)
3) 6.9kV switchgear
4) Protection system of electrical equipment
5) Power transformer
6) MV motors etc
7) RO plant, REVERSE OSMOSIS system
8) 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations

SENIOR ELECTRICAL ENGINEER
M/S DOOSAN, KOREA HEAVY INDUSTRIES AND CONSTRUCTION COMPANY LTD, ABU DHABI, U.A.E,
DURATION : 03/2001 To 07/2002 (1 YEARS / 4 MONTHS)

PROJECT: UMM AL NAR DESALINATION Project (DESALINATION Plant-5nos)
CLIENT: Abu Dhabi WATER and Electricity Authority (ADWEA)
CONSULTANT: Mott Mac Donald Ltd (MML)
MAIN CONNTRACTOR: DOOSAN (A reputed construction company in Power and DESALINATION Plant)

COMPANY SCOPE OF WORK:
1) Expansion of existing 220kV GIS substation, Make - Siemens
2) 220kV/11kV transformer (100MVA-2nos),
3) 220kV cable laying and termination
4) Multi Stage DESALINATION plant- 4 units
5) Sea WATER Intec, chlorination plant, WATER treatment plant, Remine plant, pumping station, MV SWGR, MV motors etc
6) Boiler – 4 units
7) 400kV/ 220kV/ 132kV GIS Substations and 33kV /11kV Substations

KEY ROLE & RESPONSIBILITIES:
Working in project department, responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning, operation and maintenance of following equipment to complete the project in time:
1) Prepare BOQ, cable drum schedule, cable schedule, cable pull sheet and cable routing detail terminal details, work schedule etc.
2) Prepare inspection report, test report, coordinate with Mott Mac Donald, consultant to carryout inspection, testing and commissioning of all electrical equipments.
3) Carryout erection, testing and commissioning of protection panel, bus bar transfer panel etc
4) Support to SIEMENS Engineer for erection and commissioning of 220kV GIS SWGR and protection system.
5) Coordinate with consultant for erection, testing and commissioning of 220kV GIS, 11kV SWGR, 220kV/11kV transformer (100MVA-2nos), LV SWGR, MCC panels, control panels, protection panels etc.
6) Look after trouble shooting in electrical equipment, lighting, telecom and fire fighting panel, etc
7) Monitoring the erection, installation and testing up to completion of project
“ELECTRICAL ENGINEER”
SAUDI BINLADIN GROUP (P.C.M .DIV.), JUBAIL, SAUDI ARABIA
DURATION : 11/1997 To 02/2000 (2 YEARS / 3 MONTHS)

COMPANY SCOPE OF WORK:
This company is a reputed EPC company in petroleum, chemical and mining field. We are responsible for erection, testing and commissioning of electrical equipment in ABNZAHR PP project expansion and PETROCHEMIA project expansions under the supervision of Parson Consultant a reputed American Company.

KEY ROLE & RESPONSIBILITIES:
Working in project department responsible for detail design, procurement, construction, testing and commissioning of electrical equipment to complete the project in time within budget:
1) Preparing technical specification of lighting panel and lighting accessories
2) Preparing, submittal of all technical documents for the lighting system to get approval
3) Preparing BOQ for the building lighting system to arrange material
4) Coordinate with consultant to carry out testing and commissioning of all electrical equipments
5) Carryout erection, testing and commissioning of lighting system, grounding system, communication system and fire fighting system
6) Preparing as built drawing wherever required in the electrical system to submit to the client.

“ELECTRICAL ENGINEER”
FLEX CHEMICALS LTD, MALANPUR, GWALIOR, M.P., INDIA
DURATION : 07/1995 To 11/1997 (2 YEARS / 4 MONTHS)

COMPANY SCOPE OF WORK:
This company is a packaging and printing industry, making PTA/ DMT and film paper having following machine and equipment:
A) PTA and DMT manufacturing machine- 6 units
B) 33kV substation/ MV SWGR/ LV SWGR/ MCC room etc
C) Emergency diesel generator and accessories, 1MW – 5 units
D) Steam boiler, utilities, cooling towers etc
E) HV transformer/ MV transformer/ LV transformer etc
F) REVERSE OSMOSIS system

KEY ROLE & RESPONSIBILITIES:
Working in project department, responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning of following equipment to complete the project in time:
1) Prepare single line diagram for MV SWGR, LV SWGR, MCC, lighting system, DG set supply distribution etc.
2) Selection and sizing of all electrical equipment including Generator, Transformer, Cables, Bus bar, Motors, Battery, breakers etc
3) Design of electrical equipment like MV SWGR, LV SWGR, MCC, cable size etc
4) Estimating quantities of cable, trays, motors, local push button station, light fittings, wire, grounding cable, grounding pits and accessories required for this project.
5) Erection, testing and commissioning of electrical equipment like HV transformer, MV/LV transformer, protection panels, GIS SWGR, MV SWGR, LV SWGR, control panels, synchronization panels, MV motors, LV motors, HV cable, MV cable, LV cable, 1000KVA diesel generating sets, etc.
6) Preparation of Master list of spare parts and maintaining adequate spare parts

SENIOR FIELD ELECTRICAL ENGINEER
HARAYANA PETROCHEMICALS LTD, REWARI, HARAYANA, INDIA
DURATION : 08/1993 To 07/1995 (1 YEAR / 11 MONTHS)

COMPANY SCOPE OF WORK:
This company is a manufacturing industry, making PTA/ DMT and synthetic yarn for cloths having following machine and equipment:
A) Synthetic yarn manufacturing machine- 8 units
B) PTA/ DMT manufacturing machine – 4 units
C) DG sets, 1MW- 8 unit with synchronization panel and control panel
D) MV SWGR, LV SWGR, MCC, control panel, thyrister control panel, inverter panel, UPS panel, battery charger, batteries etc
E) Cooling towers- 8 units
F) Steam boiler – 2 units
G) Booster pump house etc

KEY ROLE & RESPONSIBILITIES:
Working in project department, responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning, operation and maintenance of electrical equipment to complete the project in time:
1) Carryout design, procurement, erection, testing, commissioning of electrical equipment require for project expansion.
2) Operation, maintenance, trouble shouting of electrical equipments in petrochemicals plant like MV SWGR, LV SWGR, MCC, control panel, electronic panel, synchronization panel, UPS, diesel generator sets, power transformers, MV motors, LV motors, DC motors etc.
3) Execute require modification of existing plant.
4) Prepare master list of spare parts and maintaining adequate spare parts inventory in store for maintenance of electrical equipment


SENIOR FIELD ELECTRICAL ENGINEER
SIDHARTH PAPERS LTD, REWARI, HARAYANA, INDIA
DURATION : 1987 – 1993 (6 YEARS)

COMPANY SCOPE OF WORK AND EQUIPMENT:
This company is a paper manufacturing industries, making MICR and Non MICR security paper having following machine and equipment:
A) MICR and Non MICR security paper manufacturing machine- 4 units
B) DG sets, 1MW- 4nos
C) DC motors, Speed control panel - 4 no
D) MV SWGR, LV SWGR, MCC, control panel etc
E) Auxiliary boiler – 1no
F) Booster pump house
G) Synchronization panel, UPS, diesel generator sets,
H) Power transformers, MV motors, LV motors, DC motors etc.

KEY ROLE & RESPONSIBILITIES:
Working in project department, responsible for detail design, procurement, and delivery of electrical equipment in time, carryout construction, testing and commissioning, operation and maintenance of electrical equipment to complete the project in time:
1) Review specification of power transformers, generators, MV SWGR, LV SWGR, MCC, control panel, MV motor, LV motor, MV cable, LV cable, lighting fitting etc.
2) Estimate the electrical items required for this project like cable length, wire length, number of light fitting and accessories etc.
3) Testing and final setting of protection relays
4) Modification in electrical equipment and in electrical panel to minimize break down time of machine
5) Prepare master list of spare parts and maintaining adequate spare parts inventory in store for maintenance of electrical equipments

Passport Detail:
Passport no: Z2704201 Place of issue: LUCKNOW, India
Passport issue date: 29/11/2013 Passport expiry date: 28/11/2023

Permanent Address:
Village & P.O. PAKHAWAIYA, KHAMARIYA, VARANASI, U.P. India

PERSONAL Detail:
Gender: M, Date of birth: 23/09/1962 Marital Status: married,
No of dependants: 3 Height: 163cm, Weight: 68kg


DATED: 05/05/2018

PLACE: MIRZAPUR, U.P., INDIA,