Khushi Ram

TRUE KNOWLEDGE (CURRICULAM VITAE)
B. E. (Mechanical) with 19 Years Mechanical Experience

KHUSHI RAM SWAMI

Mob. +91 9466024102 (India).
+91 8295961882 (India)
+213 671629828(Algeria)
E-mail. ram_khusi@yahoo.com
pwnswm@gmail.com
Passport Details:-
Passport No. K-9473514 (New Delhi), Validity: - 13 Feb. 2023.

Carrier Abstract:-
More than 19 years experience working in Oil & Gas Industry for Production of Oil and Gas, Water/Polymer Flood facilities Operation, and Chemical waste disposal with EPA compliance standards. A competent Lead Engineer with over 11 years of rich experience in Maintenance and Repairs, Erection, pre-commissioning & Commissioning, Inventory Management & Personnel Management in oil and gas industries.
Professional Snapshot:-
• In Diesel hydro desulfurization/ hydro treating process, diesel feed is mixed with recycle Hydrogen over a catalyst bed in a trickle bed reactor at temperature of 290-400°C and pressure of 35-125 bar. The main chemical reactions in DHDS/Dehydrate hydrodesulphurization(HDS), hydro gentrification (HDN), and aromatic and olefin saturation. These reactions are carried on bi-functional catalysts. Reactor effluent is separated into gas and liquid in a separator. Gas is recycled back to the reactor after.
Back up Strengths.
• Pilot plant data bank & evaluation facilities. • Feed/product/catalyst characterization facilities •Operating Experience of Hydro processing units •Excellent technical support & troubleshooting expertise.
• Commissioning Experience of DHDT/DHDS/DHD tare.
• Provided support for pumps, compressors, steam and gas turbine
driven machinery trains up to 18,000 HP.
• Identify and solve root cause of noise and vibration issues.
• Perform dynamic testing and data analysis
• Perform natural frequency testing for products
• Set up and implement right testing for several types of issues
• Optimize product design collaborating with cross-functional team
• Use specification limits and tolerance level of products during testing
• Walk down of responsible area with client and EPC field pre-commissioning activities including planning, communicating, assigning activities, tracking progress, intervening and escalating Issues.
• Preparation of master punch Points and class wise A, B, C punch list
• Preparation of flow diagram and sketch of pre-commissioning
• Evaluation of related equipments and plants
• Inspection of ECC and handover of CCC with close punches
• Provide field support during pre-commissioning, commissioning, and startup of new facilities including field EH&S observations and Interventions during Construction and pre-commissioning.
• Lead and coordinate reviews of preliminary and final version of all C&SU material to ensure technical accuracy.
• Overseeing entire installation, pre-commissioning and commissioning activities of equipment and utilities.
Documents preparation, raise RFI and to perform equipment receiving inspection, storage and preservation inspection of rotating equipments
• Planning, scheduling and executing installation, pre-commissioning& commissioning activities for rotating equipment in oil
and gas refineries, offshore platforms, engine room and deck machineries.
• Ensuring adherence to ISO 9002 Quality Standards.
Familiarize with ARAMCO Standard (SATIP, SAIC & SATIR).
Compiled data including GIS, API, RRC, TCEQ, and BLM. Inspected Well Locations From entry gate to Bore site , including Well tree, piping, tanks, compressors, and any other equipment on site such as , Vessels, scrubbers, secondary containment, etc……
Permitted platting, pre-drilling, Hi-Pressure Pumping/ Farcing, completion, production, and final plugging.

Worked Organizations;-
M/S. PETROFAC INTERNATIONAL LTD (UAE)
Designation: - Commissioning Engineer-1.
Duration: - Aug. 2017 to June 2018.
Current Project: - SBF PLANT ALRAR (ALGERIA)
Responsibility: - Mechanical Pre-Commissioning and commissioning activities of GE Compressors, Well Head injection Skid and utilities of SBF plant.

M/S. ALGHANIM INTERNATIONAL LTD (KUWAIT)
Designation: - EPC Lead Commissioning Engineer-Mechanical
Duration: - July 2016 to July 2017.
Current Project: - OCGT Plant in Kuwait city.
Responsibility: - Commissioning of BOP & Fuel lines.

M/S. FLUOR INTERNATIONAL LTD (USA)
Designation. Comm. Engineer with pay roll supply of SEPAM.
Duration: - July 2014 to May 2016.
Project: - SADARA PETRO CHEMICAL PROJECT (Saudi Armco) KSA.
Responsibility: - Pre-Commissioning and Remedial work of chemical piping and commissioning of natural Gas, Benzene, Scalene, Acetylene Etc.
M/S. SAMSUNG C&T LTD (SOUTH KOREA)
Designation: - Commissioning Lead with pay roll supply of TCE.
Duration: - Oct. 2011 to July 2014.
Current Project: - SAMSUNG C&T (4000MW Power Plant) Saudi Arabia. Responsibilities: - Erection and commissioning of Super Critical Gas Turbine MS5002 Generator (SIEMENS).
M/S. LAS ENGINEERING LTD (INDIA)
Designation: - Senior Project Manager.
Duration: - July 2008 to Aug. 2011.
Responsible for operating maintainer/grader in finish for asphalt repaving & Other duties consist of minor equipment maintenance, pot hole patching, landscape replacement, sprinkler repair and other assigned duties.

M/S. PUNJ LLYOD LTD (INDIA)
Designation: - Heavy Equipment Maintenance Manager.
Duration: - Sept. 2005 to June 2008.
Responsibility:- Operated multiple equipment; including Track Hoe and Loader, Rubber Tire Back Hoe, Maintainer, Street Sweeper, Platform Lift Truck, Compactor, Blade with Fully Auto Specta Graphics, Laser system, off road dump trucks, and water trucks.

M/S. SAUDI SPIEM COMPANY LIMITED(KSA).
Designation: - Sr. Engineer (Mechanical).
Duration: - May 2002 to Sept. 2005.
Responsibilities: - Air blowing, Water flushing, Air freeing, N2 purging, chemical cleaning & loading ,steam blowing, Catalyst loading, lube oil flushing, system Dry out, prepare punch list
Operation test procedure, System Mark up P & ID, Test Pack activities.
Inspection of vessels, columns, scheduling of installation of trays, demisters and other internals.
Ensuring Standard Operating Procedures are being followed during the start up of all major equipments.
Major Equipments : Claus Air Blower, Reaction Furnace , Claus and CBA reactors, HP and LP steam generators, Steam Ejectors, Incinerators, Absorber , Regenerator, Pump.

M/S. L & T POWER LTD(INDIA).
Organization Profile: - An associate company in execution of EPC Contractor in Power Project.
Designation: Site Engineer.
Duration: - Jan. 2000 to May 2002.
Responsibilities: - SIEMENS 220 MW turbine with Bio-Mass TPP and
ATLAS COPCO Compressor, BENTLY NEVEDA vibration monitoring &
BOP systems commissioned with METSO-DCMS system
Inlet air filters system.
Equipments Breakdown/Maintenance Handled:
Pumps:
 Single and Multistage centrifugal pumps with different material of construction and Positive displacement pumps(plunger, Gear, Screw, Lobe and Diaphragm pumps)
 High pressure Boiler feed water pumps and fuel injection pumps
 Axial flow propeller pumps, Vertical turbine type pumps
 Make: SULZER, GOULDS, KSB, BAYRON JACKSON, EBARA, LAWRANCE & IR.

Compressors:
 Single and Multistage centrifugal compressors Horizontal and Vertical split(Barrel type) compressors(Make: ELLIOTT, MITSUBISHI INGERSOLL RAND, HITACHI, DOMAGK, NUOVOPIGNONE,)
 Axial flow centrifugal compressors (Make: SIEMENS Used in 135MW Gas turbines)
 Screw and Lobe Compressors (Ingersoll rand HOW DEN, ATLAS CAPOS)
 Reciprocating compressors (JOY, KHOSHALA CRIPPLE, CHICAGO PNEUMATICS).
Turbines:
 Steam turbines single and multistage Condensing, Extraction, and Back pressures steam turbines with different types of Governing system (Make: MURRAY, ELLIOTT, SHANGHAI TURBINE WORKS, WORTHINGTON, TERRY, )
 Gas turbines capacity 135MW ( SIEMENS, VOITH ,GE & Centaur 40 Solar gas turbine).
Gas & Diesel Engine:
 Hourly Based Maintenance of Gas engines - ET, DDS Tools used for Periodical testing and Overhauling Depend upon the Hours, (Make: Caterpillar, Waukesha, GMWA –Cooper Bessemer)
 Hourly Based Maintenance of Diesel Engine – Overhauling the Engine. Time Based Maintenance.(Make: Caterpillar, Kirloskar, Cummins, Leyland)

Centrifuges, Blowers and Fans:
 ID and FD fans, FD and ID Fin fans, Cooling tower fans and Lobe Blowers
 Pusher, Basket and Horizontal split Screw type centrifuges (SULZER).





Commissioned Rotating Equipments and Alignments:
 Top and Bottom entry Agitators mounted in High pr Reactors, tanks, crystallizers
 Gear Drives (Spur, Helical, Double helical, Worm and Spiral Bevel type Gears). Conveyors (Belt, Screw and Chain conveyors) .
 Rim and Face, Reverse dial Graphical & Analytical method and laser alignment. Condition Monitoring and Vibration analysis.
 Vibration data collection and analysis with IRD 880, CSI – 2130, Adash DDS 2000, Entek IRD Odyssey Software.
 DP and UT test to find cracks in Mechanical parts and welding joints
 Thickness measurement of Pipe lines and Vessels with Ultrasonic thickness Gauge.

Co-operation Duties:-
1. Responsible for preparing scope of work, Material identification, Work allotment, Maintaining, Maintaining target for production & Preparation of MTO.
2. Supporting in fabrication & erection of Oil & Gas Pipeline of Material Class -Carbon Steel, Alloy Steel. Stainless Steel and GRP, GRE lines.
3. Broad knowledge of waste water and sea water cooling operational processes and theory and understanding of sea water cooling plant optimization techniques.
4. Turbine trip logic for lube oil system, trip oil system, Lube oil system Commissioning
5. Excellent knowledge of technical developments in the field of sea water cooling treatment plant and equipment & preventative maintenance theory and techniques.




Scholastics:-
1. 12th (Non-Medical) from H.B.S.E. Bhiwani.
2. B.E. (Mechanical) from I.M.E. Mumbai.
3. NDE Certificate of Level 2nd from Mumbai.
Trainings Attended: -
1. Attended 15 days training on CNC from NTTF Bangalore
2. Attended Basic Hydraulics training from REXROTH .
3. Attended 15 days training on PCB Fabrication from NTTF Bangalore.
Computer Knowledge:
Elementary knowledge of internet & networking.
Basic, MS Word, office, hardware.
Operating System: Windows XP/NT/2000/VISTA/WINDOW 7.

Personal Details: -
Fathers Name: - Mr Purshotam Dass
Date of Birth: - 31-07-1974
Drawn Salary: - 4500 USD per month
Expected Salary: - 5400 USD per month
Joining Period: - 25 Days.
Home address. H.NO.438/31, Qutubpur, Rewari-123401
(Haryana) India.