Meljun Pepito

CURRICULUM VITAE
MELJUN J. PEPITO
+971 55 7648162
junikz_pepito@yahoo.com

POSITION APPLIED FOR: HSE

PHILOSOPHY TOWARDS SAFETY

The role of the safety professional is to ensure that work can proceed without any stoppage due to poor health and safety performance/ culture. This can be achieved by taking a proactive approach to safety; the safety professional should be responsible and advise the hazard/risk of daily work activities as per approve method statement, safety plan or risk assessment so that necessary safety precautions will be implemented prior to commence any activity, thereby eliminating/ reducing all incidents, accidents and near misses which may lead to stoppage of works, damage of companies moral & properties, hidden cost of hospitalization and loss of man hours. This can be achieved without compromising the company’s safety standards.


Personal Details

Nationality : Filipino
Education :
Diploma in Safety Engineering
Al Shabaka Technical Institute (ASTI)
Dubai, United Arab Emirates

Bachelor of Science in Nursing
University of Cebu, Philippines
Graduated November 2010

Competencies:
Diploma in Safety Engineer

National Association of Safety Professional (NASP) Diploma

NEBOSH International General Certificate

IOSH (Managing Safely)

Integrated Management System (Internal Auditor)
ISO 9001:2008 Quality Management System
ISO 14001:2004 Environmental Management System
OSHAS 18001:2007 Occupational H&S Assessment Series

OSHAD Course- Qudorat Card (Grade C)

HABC Level 2 in Emergency First Aid at Work

FOD Campaign Certificate

Control of Substances Hazardous to Health (ROSPA Approved)
Environmental Awareness and Risk Assessment

Society & Membership:

World Safety Organization (WSO) - United Arab Emirates

National Association of Safety Professional - United Arab Emirates

Institute of Safety and Fire Engineers - United Arab Emirates

Philippine Society of Safety Engineers - United Arab Emirates
Employment History:

Company : ATLAS TELECOM
Position : HSE Engineer
Address : Abu Dhabi, United Arab Emirates
Inclusive Date : April 2016 - January 2017
Project : ADIA, FIRE STATION, MART TUNNEL, CUP 1 & 2
Client : ADAC, ENOVA, DANWAY
Consultant : PARSONS, JACOBS, ALEC, HLG, PIVOT & KBR
Activities :
• Installation of cable pipes, camera poles & brackets
• Installation of airport CCTV Camera’s (Indoor & Outdoor)
• Installation of power cables and camera racks
• Installation of access controls
(Door locks, card reader, break glass & fire alarm)

Company : ATLAS TELECOM
Position : HSE Engineer
Address : Abu Dhabi, United Arab Emirates
Inclusive Date : December 2014 - March 2016
Project : Al Bateen Airport, Al Ain Airport
Client : ADAC
Consultant : PARSONS & JACOBS
Activities :
• Drilling of road and underground soil
• Installation of pipes and manholes
• Installation of camera poles & CCTV Camera’s
• Installation of concrete foundations, gates & bollards
• Road cutting, excavation and concreting using asphalt

Duties & Responsibilities:

• Ensure that all site activities are being performed as per approved method statement and risk assessment.
• Conduct safety induction training for newly hired staff/ subcontractor and mandatory daily toolbox talk.
• Conduct emergency response training, including the proper place and usage of fire equipments.
• Preparing of weekly minutes of meeting, to discuss about site safety issues and concerns.
• Organize monthly HSE meetings to have continuous improvement of site and carryout all activities safely.
• Coordinate with client & consultant, and then conduct daily site inspection & senior management walkthrough on all sites for continual improvements.
• Monitor and ensure that permit to work system and safe system of work are being complied at all times.
• Study any special execution activities at site and prepare task specific safety plan to prevent potential incidents, accidents and near misses.
• Ensure that corrective and preventive actions are taken, if any unsafe acts/conditions are observed.
• Preparing of close out reports to rectify the site observation of client and consultant if any.
• Conduct proper investigation of any incident, accident and near miss happened in the site then prepare the needful report and inform the top management to revise the HSE plan in order to avoid reoccurrences.
• Provide necessary refreshment training to all employees/subcontractors to be more aware about daily site activities, issues, hazards and risks.
• Ensure all lifting gears, mobile plants and other vehicles possess valid legal documentation and 3rd party test certificates as per the requirement.
• Arranging and giving of incentives to all employees/ subcontractors every month.
• Ensure that welfare facility, first aid facility and other such devices are available at site, up to date and valid according to standards.
• Prepare daily, weekly and monthly HSE statistics reports and initiate corrective and preventive measures.
• Ensuring the quality of work, most especially in terms of safety in order to satisfy the client and consultant.
• Monitor & update the safety tags of materials and equipment every month.
• Ensure proper usage of tools and PPE at all times.

Company : DRY DOCKS WORLD -DUBAI
Position : Safety Engineer
Address : Dubai, UAE
Inclusive Date : September 2012 - November 2014
Project : FPSO Aquila SAIPEM, FSRU Tuscana SAIPEM, BW Athena, Polarcus Project
Activities :
• Building Floating Production Storage Oil
• Repair of any type of Oil Rig
• Repair for British Petroleum Vessel and Ras Gas LNG Vessel

Duties & Responsibilities:

• Represent the consultant in health and safety meetings with the client and main contractors.
• Formulate the routinary checklist for housekeeping, emergency and evacuation plan, fire extinguishers inspection and modifying the hot works permit.
• Establish the health and safety guidelines for the main contractors to follow such as: Formulation of Emergency and Evacuation for the onboard vessel.
• Liaises with the Client Site Safety Representative(s) and other plant concerned authorities or contractors on work related safety requirements at site.
• Carries out daily site surveys to ensure: only safe work methods are in operation, toolbox talks performed prior to any work, adequate welfare and first aid facilities are properly maintained, approved color coded tools are being used and sufficient Personal Protective Equipment provided and properly worn at all time.
• Closely monitoring of crane assembly/dismantling work, permit-required for crane work/lifting operations, hot works (welding & cutting), equipment energization, tie-ins, and any hazardous activities.
• Ensure compliance of site work-force with the approved safe work permit system/ procedure in the plant.
• Participate in Corporate/ Project-developed Safety Training/ Incentive and Awareness Programs; attends safety meetings with the client and other contractors.
• Preparing of all needful documents/ safety reports on daily, weekly and monthly basis.
• Monitor the implementation of all site safety rules and the working progress.
• Conduct risk assessment and implement engineering and administrative control measures.
• Perform internal HSE audit to company and make proper documentation regarding any incident, accident and near misses to closely monitor & prevent reoccurrence.
• Plan and advice about continual improvements in existing work methods.

Company : MECHATRENDS CONTRACTORS CORPORATION
Position : HSE Advisor
Address : Binakayan, Kawit, Cavite, Philippines
Inclusive Date : January 2011 - July 2012
Clients : Philippine Shell Petroleum Corporation (PSPC) – Shell
Company, Chevron Caltex, Philippine Petron Corp.,
Total Petroleum, Philippine Nation Gas, Pryce Gas

Duties & Responsibilities:

• Plan and implement the company’s HSE policy and programs.
• Conduct safety induction to all new workers, to ensure compliance with HSE procedures in the workplace.
• Observe all operations, activities and inspection the quality of works, to ensure full compliance with Philippine Shell Petroleum Corp. (PSPC) / Client’s Quality, Health, Safety, Security & Environment (QHSSE).
• Provide training about emergency situations and the proper use of fire fighting equipments.
• Conduct risk assessment and implement engineering and administrative control measures.
• Check the PTW system prior to start any special activities on the site.
• Preparation of Job Safety Analysis (JSA) and ensure compliance through toolbox talk and safety meetings.
• Identification of construction safety hazards and preparation of preventive and corrective measures.
• Communicates promptly to top management regarding all safety procedures/concerns.
• Investigate and make reports regarding incident that causes personal, equipment & environmental damage.
• Prepare and submit to clients the HSE reports on daily, weekly and monthly basis.
• Formulate recommendation to the top management regarding the procurement of new plants and equipment to expedite the work.
• Attend company’s internal central monthly safety meeting for the continuous improvement of site.
• Ensure that all workers are wearing proper PPE in the site.

Safety Engineering Management, UAE

• Abbreviations, Definitions, Level of protection, Scope and purpose of work
• Working at Height, Use of Scaffolding
• Use of hoist, lifting equipment & accessories
• Fire and Safety
• Barricades and warning devices
• COSHH Safety
• Vibration and highly flammable
• Confine Space Entry
• Vehicle and Crane Safety
• Heat Stress Prevention
• Electrical and Chemical Hazards
• Blood Borne Pathogens
• Hazard Communication
• Machine Guarding
• Weld, Cut, Braze
• H2S and BA Awareness
• Hazardous Materials
• Ergonomics & proper manual handling
• Lock Out / Tag Out
• Personal Protective Equipment

Internal Trainings:
• HABC Level 2 in Emergency First Aid at Work
• Basic Life Support
• Control of Substance Hazardous to Health (COSHH)
• Fault Tree Analysis & Tripod Beta Investigation Process
• Basic Rope and Fire Fighting Techniques
• Water Rescue and Survival

Trainings acquired from Dry Docks World:
• Risk Assessment & Confine space
• Rigging and Slinging Safety Awareness
• Environment Impact Protection

Trainings acquired from Philippine Public Safety College:
• Safety Supervisory Course
• Certificate in Fire safety and Risk Management
• Certificate in Environmental Management
• Fire Prevention and Fire Fighting Course
• Criminal Investigation and Detection Course
• VIP Security Training and Intelligence Course

Knowledge and Skills:
• Detailed knowledge of current health & safety legislation and best practice.
• Demonstrated experience of H&S, security strategy & policy development in a large, complex environment.
• Management level experience within a health and safety service including experience of implementing new solutions to maximise service performance.
• Proven ability of communication and influence senior level.
• Formulation of course outlines and training modules.
• Expert in incident / fire scene investigation and evidence base evaluation.
• Expert in planning company’s HSE policy and conducting risk assessment.
• Expert in implementing and complying of international and local (OSHAD) standards.
• Possessed an extensive knowledge in Lifting Equipment Engineer’s Association (British Standards).

PERSONAL INFORMATION:

Language Spoken : English, Filipino, Arabic
License : UAE Driving License (Manual)
Birth date : February 13, 1988
Birthplace : Cebu City, Philippines
Religion : Roman Catholic
Height : 5'7”
Weight : 169.4 lbs. (77kg)
Marital Status : Single
Home Address : Cebu City, Philippines

I hereby certify that the above information is true and correct to the best of my knowledge and recollection.