John Sigamani

• Ensure daily inspections and Planned Maintenance on electrical equipment time to time is carried out.
• Ensure that the preparation of permit to work system & Isolation certificate & in place.
• Supervision & Inspection of maintenance work carried out on all the Electrical & Instrumentation Equipments.
• Carry out maintenance and repair on electrical components of drilling equipment, i.e. Driller’s console, DC drilling motors and auxiliaries, Top Drive System, draw works, mud pumps, Agitators, Trip tank motors, Shale Shaker drives, etc.
• Planning for materials, developing vendors to obtain timely procurement of materials and equipments to facilitate smooth production process.
• Basic knowledge of maintenance and repair of routine third party equipment, under their direction.
• Start and bring generators (main and emergency) on line for single and parallel operation. Measure insulation resistance of windings. Clean and inspect windings and exciters. Perform all required preventative maintenance.
• Isolate circuits. Troubleshoot, service, maintain and repair breakers, including removing breakers if required and installing replacement.
• Planning of the work activities identify & set priorities on the work to be done.
• Clean inside switchboard, including bus bars, following proper procedures. Properly check connections. Troubleshoot service, maintain and repair switchboard.
• Clean, inspect, repair/replace brushes, brush gear, commutator, windings and Connections. Measure insulation resistance of windings. Troubleshoot and clear ground faults. Perform all required preventative maintenance.
• Carrying out PMS on STAR IFS maintenance system and taking out maintenance work order & closing the work order after completion.
• Preparing of material requisition through IFS online procedure.
• Preparation for Pre Rig move & performing the rig move check list.
• Supervising & Performing Mechanical repairs & replacement of gearbox, bearings, bull gears etc.