S And C Invotek

S&C Invotek Bag Filter housings size upto 220 GPM which can be used as a basket strainer and a bag filter.Inlet & outlet can be provided to any side / angle with BSP /NPT couplings,flanges, unions,etc

Duplex Filter Design permits continous operation as flow can be directed to either housing while the other is serviced. One lever controls all valves,which seal bubble tight

will be updated.

Multi Bag / Basket Unit eight different sized housing in flow to 4500GPM.Carbon or SS304/316 housing hold upto 23 baskets / bags.

They are easy to move from place inshopfloor where batch filteration is required. Fitted with a filter system, pump, pipelineon a trolley with electric starter. Backwashing line also can be provided on this type of system.

Designed for filtering metal working coolants and fluids.Available with /without magnets.These magnets holds heavy metal chips to avoid damage to filter bags.

These filter housing offer low price, greater dirt holding capacity and higher flow rates. Less space occupancy, more flow,economical.

These stainless steel cartdge elements overcome the temperature and compatibility limitations of fabric or synthic fiber cartidges.They’re good to 500 F.and are cleanable and re-usable rated 5-800 microns at 95 % efficiency.

Pleated polypropylene,polyethersulfone PTFE,nylon membrane cartidges available down to 0.1 micron rating which can be sterlised or autoclaved and resuable.

These filter bags are for heavy dirt load application.With 3 times the surface area of similar of sized bags,it will increase the amount of contaminant held, and extend the time between change-out. Rated 1-110 microns at 95% effciency. Top By welding each bag seam together this exclusive S&C positive heat-sealing process eliminates all needle holes that allow impurities to escape. S&C indusrty standard,panted, Poluloc one piece molded top provide a more positive seal than sewn ring top bags,and features built-in handles for faster,easier installation and removal. Top S&C industry standard, patended, polyloc one-piece molded top provides a more positive seal than sewn ring top bags, and features built-in handles for faster, easier installation and removal.